Cut a 3 1/2"x 6 1/2" strip from the black/gray print and cut the rust/pink piece in half to make two 3 1/2" x 6 1/2" pieces.
Place the black/gray print and one of the rust/pink pieces right sides together. Place the other black/gray print piece and rust/pink piece right sides together with the cream/gray piece as shown below.
4. Place a strip of the triangle paper on top of the pieces of fabric like shown below and pin it down. Make sure to pin all the way through the cream/gray. Shorten your stitch length to about 12 stitches per inch. Sew on the dashed lines and then cut on all of the solid lines, including around the sides. Press the seams toward the paper. Then rip the paper off and trim your dog ears.
5. Now you can start on step 4 on the instruction sheet provided with the kit.
Comments